请选择 进入手机版 | 继续访问电脑版
分析部落 - AIA,赶快注册吧!
立即注册

合作站点账号登陆

扫一扫,访问微社区

快捷导航
查看: 42|回复: 0

Baseline 8900系列色谱仪在空气中测量硫化氢H2S和二硫化碳CS2的应用

[复制链接]
  • TA的每日心情

    7 天前
  • 签到天数: 285 天

    连续签到: 4 天

    [LV.8]以坛为家I

    1367

    主题

    2236

    帖子

    3万

    积分

    超级版主

    Rank: 8Rank: 8

    积分
    35412
    发表于 2019-4-16 00:21:29 | 显示全部楼层 |阅读模式

    马上注册,精彩即将继续...

    您需要 登录 才可以下载或查看,没有帐号?立即注册

    x
    本帖最后由 red 于 2019-4-16 00:23 编辑

    Hydrogen Sulfide & Carbon Disulfide in Air Application

    Baseline 8900系列色谱仪在空气中测量硫化氢H2S和二硫化碳CS2的应用

       The Series 8900 Hydrogen Sulfide and Carbon Disulfide Analyzer provides direct measurement of H2S and CS2 in ambient air. This instrument is utilized for continuous emission monitoring.
       8900系列硫化氢和二硫化碳分析仪可直接测量环境空气中的H2S和CS2。,该仪器用于连续排放监测。
    baseline 8900.jpg

        The Series 8900 H2S and CS2 Analyzer employs a Photoionization detector (PID) as the sensing element. A dual column configuration with timed backflush to vent is used to strip off moisture and heavier hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed volume of sample is carried to the pre-cut column. Backflush is timed so that only the H2S, CS2, and other similar components are eluted to the analytical column. Contaminants on the pre-cut column are backflushed to vent. H2S and CS2 are separated from potentially interfering components on the analytical column and elute to the detector for analysis.   8900系列H2S和CS2分析仪采用光电离检测器(PID)作为传感元件。 双柱配置具有定时反吹至排气口,用于去除水分和较重的碳氢化合物。 预切割柱与分析柱串联使用。 在样品注射时,将固定体积的样品运送到预切割柱。 反吹定时使得只有H2S,CS2和其他类似组分被洗脱到分析柱。 预切割柱上的污染物被反冲至排气口。 将H2S和CS2与分析柱上的潜在干扰组分分离并洗脱至检测器用于分析。

    Analysis Time分析时间
    <180 seconds
    Detector检测器
    PID
    Column色谱柱
    Packed
    Oven Temperature恒温箱温度
    40oC, Nominal
    Carrier Gas载气
    Nitrogen, 13.5 cc/min, Nominal
    Lower Detection Limit最低检测限
    20 ppb
    Accuracy准确度
    1% of Full-scale
    Precision精确
    2% of Measured Value
    Span Drift (24HR)24小时漂移
    <2% of Full-scale
    Sample Flow Rate样气流量
    250 - 500 cc/min, typical
    Output输出

    Digital: RS-232, optional Local Area NetworkAnalog: (1) 0-20ma or 4-20ma loop power supplied, isolated. Selectable for: gas concentration, unintegrated detector signal. Options for up to 20 additional programmable 0-20ma, 4-20ma or voltage outputs: 0-1V, 0-5V, or 0-10V.
    Relays继电器
    (5) User programmable relays for concentration and diagnostic alarms (1A @ 30Vdc). Options for up to 32 additional relays available.
    Inputs输入
    Optional digital input board for 3 contact closure inputs. Supports start analysis, start calibration, and analyze calibration gas sample.



    努力打造AIA成为在线分析行业第一科技媒体!
    您需要登录后才可以回帖 登录 | 立即注册

    本版积分规则

    在线分析QQ群164930606|Archiver|手机版|小黑屋|分析部落 - AIA ( 冀ICP备16007748号

    GMT+8, 2019-4-25 11:03 , Processed in 0.193899 second(s), 38 queries .

    Copyright © 2016 分析部落 - AIA | www.ai-a.cn

    Powered by www.ai-a.cn X3.2

    快速回复 返回顶部 返回列表